TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

Flame-retardant effect of cross-linked phosphazene derivatives and pentaerythritol derivatives on polypropylene

Journal of Thermal Analysis and Calorimetry - A phosphazene-based flame retardant (PBFA) was synthesized by hexachlorocyclotriphosphazene and N-aminoethylpiperazine. To improve the flame retardancy...     

Comments on “A note on “A novel approach to multi attribute group decision making based on trapezoidal interval type-2 fuzzy soft sets””

In a recently published paper “A note on “A novel approach to multi attribute group decision making based on trapezoidal interval type-2 fuzzy soft sets””, Khalil and Hassan pointed out that assertions (3) and (4) of Theorem 3.2 in our previous paper “A novel approach to multi attribute group decision making based on trapezoidal interval type-2 fuzzy soft sets” are not true [2]. Furthermore, they introduced the notions of a generalized trapezoidal interval type-2 fuzzy soft subset and a generalized trapezoidal interval type-2 fuzzy soft equal and used these two notions to correct the flaw in assertions (3) and (4) of Theorem 3.2 in our previous paper. In this paper, we show by a counterexample that Khalil and Hassan's correction is incorrect and provide the modified versions of assertions (3) and (4) of Theorem 3.2, along with a strict proof. In addition, Khalil and Hassan pointed out by a counterexample that assertions (3)–(6) of Theorem 3.5 in our paper are not true and proposed the corrections of those assertions. In this paper, we show that Khalil and Hassan's counterexample and corrections are incorrect and provide a new example to verify the inaccuracies of assertions (3) and (5) of Theorem 3.5 in our paper. Moreover, we offer the modified versions of assertions (3) and (5) of Theorem 3.5 and prove them. Finally, Khalil and Hassan's statement that assertions (4) and (6) of Theorem 3.5 in our previous paper are not true is proven to be incorrect, i.e. assertions (4) and (6) of Theorem 3.5 in our previous paper are true.     

Novel colorimetric,photothermal and up-conversion fluorescence triple-signal sensor for rosmarinic acid detection

Rosmarinic acid (RA) is promising as a natural and nontoxic food additive. However, many analysis methods for RA generally depend on large instruments and single signals for quantitative detection. A new up-conversion fluorescence, colorimetric and photothermal multi-modal sensing strategy is developed for the quantification of RA. β-cyclodextrin (CD) modified citric acid (Cit) wrapped NaYF₄:Yb/Er-Cit-CD (Y:Yb/Er-Cit-CD) up-conversion nanocomposite has been synthesized, which emits green fluorescence at 550 nm under 980 nm near-infrared (NIR) excitation. In the presence of oxidized 3,3′,5,5′-tetramethylbenzidine (oxTMB), the green fluorescence is significantly quenched attributed to the fluorescence inner filter effect (IFE) between oxTMB and Y:Yb/Er-Cit-CD. When RA is intervened, blue oxTMB is reduced to colorless 3,3′,5,5′-tetramethylbenzidine (TMB) inducing the recovery of up-conversion fluorescence. At the same time, colorimetric and photothermal signals readout can be easily achieved thanks to the color indication and photothermal effect of the oxTMB. The constructed Y:Yb/Er-Cit-CD/oxTMB sensor displays high sensitivity, visibility and simplicity for RA, and the limits of detection (LOD) for fluorescence, colorimetric and photothermal were 0.004 µmol/L, 0.036 µmol/L and 0.043 µmol/L, respectively. This sensing system is successfully performed for the detection of RA in food samples.     

Facile synthesis of ordered mesoporous molybdenum carbide electrocatalysts for high-performance hydrogen evolution reaction

In this study, a simple method was designed to prepare ordered mesoporous carbons embedded with molybdenum without any extreme conditions. We prepared three different ordered molybdenum carbide materials with mesoporous structures to explore the influence of the structure of molybdenum-based materials on the HER catalytic efficiency. The ordered mesoporous molybdenum carbide catalysts (CMK-3-MoCx, fCMK-3-MoCx, CMK-8-MoCx) were characterized by SEM, TEM, XRD, nitrogen adsorption-desorption and XPS. The HER is catalyzed efficiently on the three electrocatalysts, fCMK-3-MoCx shows the best HER electro-catalytic performance with a small onset potential of −0.06 V vs. RHE, a low tafel slope of 66 mV dec⁻¹ and a small over-potential value of 89 mV at 10 mA cm⁻². This excellent performance on HER is due to its high specific surface area and highly ordered mesoporous structure that resulted in excellent proton transport efficiency and high electron transfer rate. Our results provide a new research direction for the application of flat ordered mesoporous structures in catalysis.     

Three New Phenyl Ether Derivatives from Aspergillus carneus HQ889708

Three new phenyl ether derivatives, 3‐hydroxy‐5‐(3‐hydroxy‐5‐methylphenoxy)benzoic acid ( 1 ), 3,4‐dihydroxy‐5‐(3‐hydroxy‐5‐methylphenoxy)benzoic acid ( 2 ), 3‐[3‐hydroxy‐5‐(hydroxymethyl)phenoxy]‐5‐methylphenol ( 3 ), and three known compounds 4 – 6 were obtained from the fermentation broth of Aspergillus carneus HQ889708, which was isolated from sea water from South China Sea. The structures of compounds 1 – 3 were established on the basis of spectroscopic methods including ESI‐MS and NMR. Compounds 4 – 6 were reported before as synthesized products, herein, they are reported from nature for the first time.     

Paecilomycines A and B,Novel Diterpenoids,Isolated from Insect‐Pathogenic Fungi Paecilomyces sp. ACCC 37762

Two new diterpenoids, named paecilomycine A ( 1 ) and paecilomycine B ( 2 ), including a novel skeleton with a five‐membered lactone ring, together with three known labdane diterpenoids, rel‐(1R,3S,4aS,5R,8aS)‐5‐[(3E)‐4‐carboxy‐3‐methylbut‐3‐en‐1‐yl]decahydro‐3‐hydroxy‐1,4a‐dimethyl‐6‐methylidenenaphthalene‐1‐carboxylic acid ( 3 ), botryosphaerin E ( 4 ), and agathic acid ( 5 ), were isolated from solid culture of the insect pathogenic fungi strain Paecilomyces sp. The structures of all compounds were established on the basis of comprehensive spectroscopic studies. The relative configurations of 1 and 2 were determined by single‐crystal X‐ray diffraction analyses.     

Two New Cadmium(II) Compounds based on Distinct Second Building Subunits: Solvothermal Syntheses,Crystal Structures,and Luminescent Properties

Two cadmium(II) coordination polymers, namely [Cd₃(bpt)₂(DMA)₂]_n ( 1 ) and [Cd₂(bpt)(btz)(DMF)]_n ( 2 ) (H₃bpt = biphenyl‐3,4′,5‐tricarboxylic acid, Hbtz = 1H‐benzotriazole, DMA = N,N‐dimethylacetamide; DMF = N,N‐dimethylformamide), were solvothermally synthesized and structurally characterized by single‐crystal X‐ray diffraction. Compound 1 displays a 3D framework based on trinuclear {Cd₃(COO)₄} subunits and can be simplified into a (4,8)‐connected topological network by viewing bpt^3– ligands and trinuclear {Cd₃(COO)₄} units as 4‐, 8‐connected nodes, respectively. Compound 2 also displays a 3D framework but based on 1D chain subunits controlled by carboxylate groups and btz^– ligands. In addition, the thermal stabilities and luminescent properties of compounds 1 and 2 were also investigated.